1717 EN
WARRANTY, SAFETY AND INSTALLATION
Source of danger: when moving heavy loads
Attention
Risk of injury due to heavy lifting when loading and unloading the
appliance onto and from transport equipment. Use a fork-lift truck or
a pallet truck.
Do not exceed safety limits to lift and load the appliance. Use
personal protection equipment.
Carefully remove the straps and lid from the fryer’s box. Once the lid
has been removed, remove the polystyrene and the parts located on
top of the fryer (Filter kit - Bucket, funnel, lter and hose) (see Figure
1).
Once the above-mentioned parts have been removed, remove the
outer box to access the machine (see gure 2).
Open the door of the fryer unit and remove the polystyrene
positioners found inside. Next, remove the fryer case by
disconnecting the fryer’s power cable (black angled plug), loosen the
black wheel on the extractor dock located at the top left of the frying
case, then lift the dock and readjust the wheel so that it stays upright.
To Next Page
Loading...