28QUALITYFRY 28QUALITYFRY
GENERAL DESCRIPTION OF THE EQUIPMENT
Electric installation and connection
The machine is tted with a exible electric cable with a length
of two (2) metres to connect it to the electric power grid of
the premises. This network must be single-phase and must
withstand a power voltage of 20A, 230V and a frequency of 50/60
Hz. In addition it must have an eective grounding connection and a
protection system against power surges and derivations. For optimal
performance, two important factors are recommended:
(1) Place the machine as far away as possible from heat sources,
such as: ovens, irons, air outlets for air conditioning equipment.
(2) The countertop or furnishing where the machine is to be
installed must be completely horizontal. If the machine is not in this
position, its operation may be aected and oil spills may occur.
The machine includes a potential equalisation connector on
the lower part of the oor of the machine in order to connect
grounding connections serially.
To Next Page
Loading...