*1: Not Installed/Auto/CD/DVD/ARMD
*2: Disabled/Auto
*3: Auto/0/1/2/3/4
*4: Auto/SWDMA0/SWDMA1/SWDMA2/MWDMA0/MWDMA1/MWDMA2
/UDMA0/UDMA1/UDMA2/UDMA3/UDMA4/UDMA5/UDMA6
*5: Auto/Disabled/Enabled
*6: Disabled/Enabled
Control Group User Access Level
Type Access Level 1
LBA/Large Mode Access Level 1
Block (Multi-Sector Transfer) Mode Access Level 1
PIO Mode Access Level 1
DMA Mode Access Level 1
S.M.A.R.T. Access Level 1
32Bit Data Transfer Access Level 1
SuperIO Configuration
*1: Disabled/[3F8/IRQ4]/[3E8/IRQ4]/[2E8/IRQ3]
*2: Disabled/[2F8/IRQ3]/[3E8/IRQ4]/[2E8/IRQ3]
Control Group User Access Level
Serial Port1 Address Access Level 1
Serial Port2 Address Access Level 1
Chapter 3 — BIOS
41
Advanced
BIOS Setup Utility
llows BIOS to Select
Serial Port1 Base
Addresses.
← Select Screen
↑↓ Select Item
-+ Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Win627DHG Super IO Chipset
----------------------------------------------------
Serial Port1 Address [3F8/IRQ4]*1
Serial Port2 Address [2F8/IRQ3]*2
v02.66
To Next Page
Loading...
