When the green 25% indicator blinks, Turbo 3 has shut down power
and must be recharged.
During charging, each green indicator blinks on as charge is returned to
the battery. When all four green indicators are steadily lit, charging is
complete. See Section 5 for more charging details.
Turbo 3 powers two pieces of photo gear at the same time. Socket
covers keep rain and dirt out of one (or both) sockets when not being
used. Socket “A” can be used only for Flash Cables. Socket “B” can
be used for Camera or Flash Cables, and for charging.
Turbo 3 has a cable locking feature that works with newer Flash Cable
models CKE2, CZ2, and CQ2. Older cables may also be used without
the locking feature. Please see the tables in Section 8 for all cable
models.
Turbo Camera Cables and Flash Cables come in several styles,
defined by their initial prefixes.
C” series Flash Cables power flashes from any Turbo model.
Examples are CK, CKE, CKE2, CM4, CV, CZ, CZ2, CQ2, CQ8, etc.
They power flashes with high voltage, rapid recycling power. Plug them
into either “A” or “B” Turbo 3 socket and into your flash. The white LED
panel indicator marked flash symbol will light.
B
To Next Page
Loading...
Need help?
General
