Need help?Do you have a question about the Quarq ShockWiz and is the answer not in the manual?
Instructions for attaching to the back of the crown.
Instructions for attaching to the front of the crown.
Instructions for attaching to the upper crown.
Instructions for attaching to the air valve.
Procedure for removing air caps from standard ShockWiz.
Procedure for removing air caps from Direct Mount ShockWiz.
Procedure for removing air caps from Crown Mount Fork.
Procedure for removing air caps from Inverted Fork Direct Mount.
Choose the unit for air pressure measurement.
Set pressure units and reference altitude for calibration.
Navigate to Calibration Wizard via the Settings screen.
Select from available tuning styles to customize ride feel.
Understand that 'Balanced' is the default setting.
Ride varied terrain for effective results.
Avoid air pressure/damper changes and suspension locking during a session.
Review suggestions when confidence score exceeds 50%.
Action when 'Not enough data' is indicated for suggestions.
Unthread the hose coupler from the fork or shock valve first.
Cut cable ties, remove ShockWiz, and detach air valve coupler.
Clean the ShockWiz device after use with a damp cloth.
Avoid pressure washers, acidic agents, and solvents to prevent damage.
General| Connectivity | Bluetooth |
|---|---|
| App Compatibility | iOS and Android |
| Water Resistance | IP67 |
| Sensors | Accelerometer, Pressure Sensor |
| Compatibility | Air-sprung suspension forks and shocks |
| Power Source | Rechargeable Battery |
| Type | Suspension tuning device |
To Next Page
