31
2.
Password”, then press
“ENTER/ ”
button to adjust the value.
If the password is changed, all of the
passwords in the menu will be changed at
the same time.
Note
: If you forget your password, you can
use “1470” to enter any menu locked.
3.
Press “ / ” button to select
“System Lock” and press the “
/ ”
button to select “On” or “Off”.
4.
Lock”, then press
“ENTER/ ”
button to
enter sub-menu.
a.
Press “ / ” button to select
“TV” and press the “
/ ” button to
select “Block” or “Unblock”.
b.
Press “ / ” button to select “AV” and press the “ / ” button to select “Block”
or “Unblock”.
5. Press “
/ ” button to select “US
” button
a. Press “
/ ” button to select “TV” and
press “ENTER/
” button to enter
sub-menu.
Press “
/ ” button to select and press
ENTER to block or unblock.
b. Press “
/ ” button to select
“MPAA” and press the “
/ ” button to
select “Off/G/PG/PG-13/R/NC-17/X”.
Rating” and press “ENTER/
to enter sub-menu.
d. Press “ / ” button to select “HDMI” and press the “ / ” button to select
“Block” or “Unblock”.
c.
Press “ / ” button to select “Component” and press the “ / ” button to select
“Block” or “Unblock”.
e.
Press “ / ” button to select “HDMI 2” and press the “ / ” button to select
“Block” or “Unblock”.
f.
Press “ / ” button to select “HDMI 3” and press the “ / ” button to select
“Block” or “Unblock”.
g.
Press “ / ” button to select “PC” and press the “ / ” button to select “Block”
or “Unblock”.
h. Press “ / ” button to select “MEDIA”a nd press the “ / ” button to select “Block”
or “Unblock”.
kcolBnUaideM