Quax QUARRE User Manual

First steps
First dreams
Quax®
Handboek Manuel Handbuch Manual
V2.0 Jul 2014
Tested by Notifi ed Bodies
For children who cannot climb out the bed by themselves
Nederlands : pagina 2
Français : page 14
Deutsch : Seite 26
English : page 38
EN 716:2008+A1:2013
Répond aux exigences de sécurité
Meets the safety prescriptions
Voldoet aan de veiligheidsvoorschriften Entspricht den beschriebenen Sicherheitsvorschriften
QUARRE 54 01 14xx-XL
Lit enfant convertible
Convertible babybed
Omvormbaar kinderbed
Umformbar Kinderbett
De bedlade is een optie
Le tiroir de lit est une option
Die Schublade ist eine Option
The bed drawer is an option

Quax QUARRE Specifications

General

Brand	Quax
Model	QUARRE
Category	Indoor Furnishing
Language	English

Summary

Warnings

Age and Use

Inspection

Objects over or in the bed

Safety and general information

Safety

Assembling the babybed

Step 4.1: Use both side frames 2 and four wooden dowels A

Attaching dowels to side frames.

Step 4.2: Use the parts of step 4.1, both end boards 1, eight bolts B and the Allen key SW4

Connecting end panels to side frames using bolts.

Step 4.3: Use the parts of step 4.2 and the four angle sections C

Installing angle sections onto end panels.

Step 4.4: Use the parts of step 4.3, the mattress support 3 and four bolts D

Attaching the mattress support with bolts.

Step 4.5: Changing the position of the mattress support

Assembling the junior bed

Step 6.1: Use both bed rails 4, four wooden dowels A, eight eccentrics C, the head- and footboard 1 and eight connectors B

Connecting bed rails to head and footboards using dowels and eccentrics.

Step 6.2: Use the parts of step 6.1 and the Allen key SW6

Tightening eccentrics and attaching remaining board.

Step 6.3: Use the parts of step 6.2 and the mattress support 3

Assembling the sofa

Step 8.1: Use both bed rails 4, four wooden dowels A, eight eccentrics C, the head- and footboard 1 and eight connectors B

Connecting bed rails to end panels with dowels and eccentrics.

Step 8.2: Use the parts of step 8.1, the small lattice frame 5, four bolts B and the Allen key SW6

Step 8.3: Use the parts of step 8.2 and the mattress support 3