Quax SIDE BY SIDE 010162 Series - Page 29

4. Assembling the cradle
Push the crossbar in the central PVC joint of a leg frame. Repeat with the other leg frame.
Step 2 : Use the middle frame and the safety rail
Push the safety rail onto the middle frame until it clicks into place.
Step 3 : Use the cradle frame and parts from steps 1 and 2
Turn the cradle frame and push the frame of step 1 onto the uprights of the cradle frame. Now place the middle frame
from step 2 on the frame. Turn again and pull the crib cover down.
Step 4 : Use the parts from 3
Grasp the ends of the velcro straps at the bottom of the cradle frame, connecting them around the middle frame.
Step 1 : Use the two leg frames and the connecting tube
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium
T
T 0032 9 380 80 95 www.quax.eu -
E
E info@quax.eu
SIDE BY SIDE 010162-xx
29