Quax SIDE BY SIDE 010162 Series - Page 31

Anti-refl ux function. To help with a refl ux problem, you can set the head end one position higher than the foot end.. For
example from position 1 to 2, or from 2 to 3, etc... The slope must not exceed 10 degrees.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium
T
T 0032 9 380 80 95 www.quax.eu -
E
E info@quax.eu
SIDE BY SIDE 010162-xx
31
8.2 : When used in cradle mode, fully closed
8.3 : When used in co-sleeping mode, with open side
An inclined setting is not safe in the co-sleeping mode.
The height adjustment should be placed at the same
height to ensure a fl at and safe sleeping environment.
The mattress of the
adult’s bed shall be
aligned to or above the
top of the drop side.