System boot-up sequence BES X installation manual
106 P/N: 400288005; Rev: L, 09/21
After this process, the boot-up of the system is not completed and, if the system does not request a
reinitialize or a program upload, the screen changes as shown in the following image:
1. vTNT software version/date.
2. L-COM main device test. The L-COM main device test result will be displayed in this row. If the particular
device works properly, the result of this test will be “Okay”, alternatively an error code will be displayed
and the entire boot of the 4HD/5HD-CPU will stop. Each main device will be displayed with a different
code:
▪ Test QVis-X: Q-Vision camera connected to an AMF XL/XLi series pinspotter.
▪ Test QVis-Q: QVision camera connected to an AMF non-XL/XLi series pinspotter.
• Test FBox: this test will be displayed under the Test QVis-Q row only if an F-Box pinspotter interface
has been installed and configured.
▪ Test QAll-X: this test will be displayed if an M-Vision camera with an ALL/XL pinspotter interface has
been installed with AMF XL/XLi series pinspotters.
• Test TV: This test will be displayed under the Test QAll-X row to test the presence of the M-Vision
camera.
▪ Test TV: This test will be displayed if a T-Vision camera with F-Box or Six pinspotter interface has been
installed.
• Test FBox: this test will be displayed under the Test TV row only if a T-Vision camera with an F-Box
pinspotter interface has been installed and configured.
▪ Test QAll-o: QBK-Corde pinspotter interface (string machine interface).
▪ Test QAll-m: ALL pinspotter interface for Mendes MM2001, ME90 or Qubica MAG3IT, TMS
pinspotters.
▪ Test QAll-s: ALL-GS pinspotter interface for Brunswick GS series pinsetters (not NEXGEN).
▪ Test QAll-g: ALL pinspotter interface for Brunswick GS X NEXGEN series pinsetters.
3. Optional devices test area: the optional devices (SuperTouch consoles, EasyKey consoles, HyperServer,
Effects Server, etc.) test results will be displayed in this area. Only the devices configured in Conqueror X
will be displayed. If the device works properly, the result of its test will be “Okay”, alternatively an error
code will be displayed and the entire boot of the 4HD/5HD-CPU will stop. Each different type of terminal
board is displayed with a different code:
▪ Test 4HD (or 5HD)-TB on L4: 1 wired console with keypad is connected to the L4 port of the 4HD/5HD-
HUB unit (one per pair).
▪ ONLY WITH 4HD-HUB REV.2: Test Tb on D2: 1 wired console with keypad is connected to the D2 port
of the 4HD-HUB Rev.2 unit (one per pair).
To Next Page
Loading...