QubicaAMF 400288005 - How to Adjust Cable Cover

System boot-up sequence BES X installation manual
108 P/N: 400288005; Rev: L, 09/21
Console errors:
151
One EasyKey console
has been installed
with the 286002819
speaker cable, while
the other EasyKey
console has been
installed with the
286002824 speaker
cable.
190
No communication
with the SuperTouch
console.
The SuperTouch console has not been detected during the
startup of the VTNT.
From 191 to
198
Console program
check fail
Upload programs to the lanes.
199
Console detected but
not entering in Run
mode
This error can appear when the SuperTouch has been replaced
or when the console has been detected but it did not enter in
Run state.
Reinitialize to the lanes.
TV / Q-Vis / Q-All errors:
200
No communication
with the master LCOM
device
Manually restart the 4HD/5HD-HUB.
If the problem persists try to upload programs to the lanes.
In the case that the problem has not been solved please refer to
the “Solving problems on the LCOM line” procedure.
200/1
Unexpected
communication
character
200/2
Wrong character
communicating with
the master LCOM
device
Manually restart the 4HD/5HD-HUB.
If the problem persists try to upload programs to the lanes.
In the case that the problem has not been solved please refer to
the “Solving problems on the LCOM line” procedure.
200/3
The master LCOM
device seems okay
200/4
Six seems okay
200/5
Six communication fail
201
Wrong char on master
LCOM device Bin file
202
Master LCOM device
communication
failure