QubicaAMF 400288005 - Conqueror Pro Procedures; How to Upload Programs or Reinitialize the System

Conqueror Pro procedures BES X installation manual
132 P/N: 400288005; Rev: L, 09/21
18 Conqueror Pro procedures
18.1 How to upload programs or reinitialize the system
The program loading process requires a variable amount of time. The time is dependent on the changes being
made to the current lane software.
When sending the programs to the 4HD/5HD-CPU, Conqueror Pro displays the status of the loading of the
programs process divided into several steps. At the end of the process Conqueror Pro displays the success or
the failure of the program upload process.
Navigate through the Conqueror Pro main menu and select: Setup / Technical Lane Setup / Upload to lanes.
ERASE MEMORY: If this option is selected, the game will be erased and all the software in the internal
memory will be reloaded, so if this option is selected the uploading programs process will take longer.
LANES SELECTED: Clicking on this field will open a window where it is
possible to select the lanes.
REINITIALIZE: Perform a Reinitialize procedure. This process will reload the whole system on
the selected lane pair. This procedure will take more than an hour to finish. DO NOT switch
off the BES X system during this process.
RESET: The selected lanes will be reset.
UPLOAD: Upload programs to the selected lanes.