QubicaAMF 400288005 - 286002869 BES X Consoles Table Mount Assembly

Console pedestal assembly BES X installation manual
48 P/N: 400288005; Rev: L, 09/21
T.10.064 - 286002869 BES X consoles table mount assembly
[ . ]319 9
1 .2 60
[257.5]
10.14
[249.8]
9.84
10
6
12
11
5
2
9
8
1
4
3
7
PARTS LIST
#
QTY
P/N
DESCRIPTION
1
2
3
1
1
1
289100113
286002866
286002852
Table-mount support arm W/SWVL
V-Support single assembly
V-Support back
4
5
6
1
1
4
286002824
770047105
863040087
Speaker wire harness single
Speaker
PHPMS M4-,7 x 8 ZN
7
8
9
2
4
4
813005257
7010-002520-075
7060-025046-006
PHPMS M5-,8 x 25 ZN
HHCS 1/4 – 20 x 0.75 GR5 ZN
SWM 1/4 ANSI ZN
10
11
12
1
1
1
286002873
01033
088500224
Speaker plate
ETLW 10 ANSI ZN
CBL, ground, wireway cover
INSTALLATION INSTRUCTIONS
1. Mount V-Support (item 2) to table mount swivel assembly (item 1). Secure with the screws provided with item 1.
2. Mount speaker (item 5) to V-Support (item 2). Secure with four screws (item 6). Include the static protection items: 11, 12, 13.
3. Attach wire harness (item 4) to speaker (item 5). Attach black wire harness terminal to speaker «-» terminal and attach red wire harness terminal
to speaker «+» terminal. Protect wire harness by inserting connector and excess cable into the cable passage hole of the table mount swivel
assembly.
4. Assemble V-Support back (item 3) to V-Support (item 2). Secure with two screws (item 7). Take care not to pinch speaker wire harness.