QubicaAMF 400288005 - 610325104 Kit for Mounting Two BES X Pedestals at 96° (286002845)

Console pedestal assembly BES X installation manual
50 P/N: 400288005; Rev: L, 09/21
T.10.051 – 610325104 Kit for mounting two BES X pedestals at 96° (286002845)
3
1
2
CONSOLE PEDESTALS
SHOWN FOR REFERENCE
[482.6]
19.00
PARTS LIST
#
QTY
P/N
DESCRIPTION
1
2
3
1
1
6
286002841
286002842
01-019
CVR plate two pedestals at 96°
MTG plate two pedestals at 96°
PHPMS 10-32 x 0.38 ZN
This kit is for the purpose of mounting two BES X pedestals with a common cable entry. The mounting plate (item 2) provides cable passage to the
two BES X pedestals; the cover plate (item 1) is removable to provide access for servicing of the BES X cables.
INSTALLATION INSTRUCTIONS
1. Use mounting plate (item 2) to transfer and drill mounting holes for two BES X pedestals to floor.
2. Loosely mount base of the BES X pedestals to floor thru the mounting plate.
3. Pass cables for both BES X pedestals beneath bases of the BES X pedestals.
4. Install the cover (item 1) on the mounting plate (item 2) using the screws provided (item 3).
5. Mount the rear base covers of the BES X pedestals to the BES X pedestal bases.
6. Adjust the BES X bases with rear covers so that the BES X base covers do not interfere with the cover (item 1).
7. Secure the BES X base to the floor and mounting plate.
8. Continue with the installation of the BES X pedestals.