Scoring network BES X installation manual
56 P/N: 400288005; Rev: L, 09/21
T. 20.083 – 4HD/5HD-HUB installed on XLi pinspotters with safety kit
UPPER VIEW
REAR VIEW
4HD/5HD
HUB
A
A
Patch network
cable from (or )MAIN SLAVE
Scoring switchNET
A
Solid homerun cable
from Conqueror roP
server
4HD/5HD
HUB
Patch network
cables to other
4 /5HD-HD HUB
units or SLAVE
Scoring Network
switches
B
B
MAIN Scoring
NET switch
B
With XLi pinspotters with the safety kit, always install the 4HD/5HD-HUB unit and all other devices to the
panel located at the end of the aisle present between each pair of pinspotters, as shown in the details A
and B. In this example the 4HD/5HD HUB units and the other devices has been installed on the left or the
pair of XLi pinspotters.
The MAIN Scoring NET switch has to be installed in the middle of the Scoring Network. For example, in a
8 lanes installation the MAIN Scoring NET switch has to be installed between the lane 4 and the lane 5.
Do NOT run any scoring system cable in the pinspotter conduits for any reason.
Keep the scoring system cables far away from any power cable.
To Next Page
Loading...