BES X installation manual Scoring network
P/N: 400288005; Rev: L, 09/21 57
5.2 Centers with up to 12 lanes
If the bowling center has up to 12 lanes just one network switch for the scoring network is needed.
When MMS digital, TCS or Q-COM systems are purchased, QubicaAMF will supply additional switches and
the scoring network will have different configurations.
Please refer to the correct sub-section for the desired configuration.
5.2.1 Centers with up to 12 lanes with single channel video server.
One 8-port network switch will be supplied by QubicaAMF for this configuration.
The connections for the main scoring network switch are:
• 1 port for the home-run cable;
• 1 port for the single channel video server;
• 6 ports for the 4HD/5HD-HUB units.
The 4HD/5HD-HUB units must be connected to the main scoring network switch via standard patch network
cables. Refer to T.20.096 for the correct patch cables’ lengths.
The single channel video server, if present, must be connected to the main scoring network switch using a
Cat.5e solid network cable.
The second network card of the Conqueror X server must be connected to the main scoring network switch
using a Cat.5e solid network cable.
This configuration is described in T.20.091.
To Next Page
Loading...