QubicaAMF 400288005 - Tv Signal Wiring; Cable Television Installation, TV Displays

BES X installation manual TV signal wiring
P/N: 400288005; Rev: L, 09/21 79
8 TV signal wiring
T. 00.011 – Cable television installation, TV displays
CATV SOURCE
IN
6
1
12VDC
IN
OUT
16dB 16dB 16dB 16dB
16dB 16dB 16dB 16dB
4
3
12VDC
IN
OUT
2
5
USA ONLY
PARTS LIST
#
P/N
DESCRIPTION
1
2
3
756104006
286002511
756101018
CATV splitter, 2WAY
Cable assy, CATV 2 ft.
Amplifier, RF broadband
4
5
6
286002509
286002542
756103004
Cable assy, CATV 150 ft.
Cable TV 4 lane cable kit (note 5)
Terminators
INSTALLATION INSTRUCTIONS
9. All unused inputs or output of taps, splitters or amplifiers must be terminated.
10. On the CATV directional coupler, observe the direction of the signal flow. "IN" should always "FACE" the amplifier.
11. Position the amplifier in the end of the circuit as drawn.
12. If greater than 16 lanes are ordered, a second amplifier and 2-way splitter must be ordered. This configuration is designed for a maximum of
16 lane pairs.
13. The 289002540 kit comes with four 15 ft. drops, one 30 ft. extension, and one 4-way coupler. One kit is given every 2 lane pairs.
14. Mount amplifier above the overhead monitors, attach CATV cable to TV.