SAFETY
Safety
400-088-012 Page 3 Rev. Date 11/06
– Refer to the Service Manual before performing
maintenance or repair.
– Caution! Severe pinching hazard - belts.
It is also important to understand that the use of these symbols and labels is not
all-
inclusive because it is impossible to warn of all the possible hazards and consequences
that could result from failure to follow these instructions. Trained and competent bowling
center mechanics are able to recognize and avoid potentially hazardous situations.
Guards and Safety Precautions
All safety guards must be in place before operating the machine. When maintenance
is required, the following steps must be followed:
1. Disconnect the power plug
before working on the pinspotter.
2. Remove guards only as required to perform the maintenance.
3. Once maintenance is complete, replace all guards.
To Next Page
Loading...