SECTION 3.0
Lubrication
400-088-012 Page 3-1 Rev. Date 11/06
3.0 LUBRICATION INSTRUCTIONS
3.1 LUBRICATION
Lubrication is one of the most important items in the proper operation and maintenance
of the distributor. Care must be taken to ensure that lubricants are applied correctly.
Avoid excessive lubrication to minimize the possibility of transmitting lubricants to the
bowler. Before lubricating exposed parts or surfaces, it is important that the old
lubricant first be removed. It is also very important to clean the distributor as you
lubricate.
This section of the manual shows the points of lubrication, the correct lubricants to use,
and the frequency of lubrication for each part of the distributor that requires lubrication.
3.2 LUBRICANT SYMBOLS
OILING: Items indicated by a number within a square require oiling. Use SAE #10
oil as the lubricant.
GREASING: Items indicated by a number within a circle require greasing. Use a
multi-purpose grease (Bearing Guard #2) as the lubricant.
1
1
To Next Page
Loading...