QubicaAMF 90XLi - Distributor Clearance Issues

QubicaAMF 90XLi PINSPOTTER
400-088-012 Page 4-2 Rev. Date 11/06
4.2 PROBLEM: Pins feed into bin continuously at one bin position or
too many pins in one bin location.
Check spring tension.
Adjust if necessary.
START
Distributor clutch
out of
adjustment?
Distributor rollers
out of
adjustment?
Adjust distributor
rollers.
NO
YES
YES
Distributor stop
blades need
lubrication.
Apply light coat
of grease to
stop blades.
YES
NO