BES X Installation Manual, Rev.9, Jun 2018 System first start-up
P/N: 400288005 131
Swedish oval (sv-se_006_001):
English touch screen (en-us_TOUCH) and Chinese touch screen (en-us_TOUCH): SuperTouch
console with English language.
Japanese touch screen (ja_TOUCH): SuperTouch console with Japanese language.
German touch screen (de-de_TOUCH): SuperTouch console with German language.
Russian touch screen (ru_TOUCH): SuperTouch console with Russian language.
Eastern Europe touch screen (ru_TOUCH): SuperTouch console with Russian language.
Console speaker: Not used.
Lane monitors: Specify the model of the overhead monitors connected to the serial control cable or IR
control cable to the 4HD/5HD-CPU. If the monitor is not supported select QUBICA STANDARD.
Monitors on lanes: Specify how many overhead monitors (“UP” monitors) and how many touch screen
monitors (“DOWN” monitors) are present in the pair of lanes:
2 UP: two overhead monitors and no SuperTouch console.
2 UP – 1 DOWN: two overhead monitors and one SuperTouch console per pair of lanes.
2 UP – 2 DOWN: two overhead monitors and one SuperTouch console per lane.
3 UP: three overhead monitors and no SuperTouch console.
3 UP – 1 DOWN: three overhead monitors and one SuperTouch console per pair of lanes.
3 UP – 2 DOWN: three overhead monitors and one SuperTouch console per lane.
2 DOWN: no overhead monitors present and one SuperTouch console per lane.
Redemption: Enables the Redemption.
Pinsetter type: Specify the pinsetter model and the pinsetter interface installed on this lane.
Lane settings: these selections enables the option in the lane options.
Lane usage: these are counters for the lane usage.
Reservation setup: specific information for the reservation module.
Aux and Sweep: TCS setup parameter.
HDMI Settings button:
This button have to be used in two cases:
1. the monitor connected to the 4HD/5HD-CPU will not show at all the image, experiencing a monitor
message saying “NOT SUPPORTED” or “ NOT AVAILABLE” or a similar message, as not all the
monitors support all the HDMI video resolutions. In order to fix this issue you can use the EDID
mode option explained below.
To Next Page
Loading...