BES X Installation Manual, Rev.9, Jun 2018 System boot up sequence
P/N: 400288005 135
After this process, the boot-up of the system is not completed and, if the system is not requesting for a
reinitialize or a program upload, the screen changes as in the following picture:
1. vTNT software version/date.
2. L-COM main device test. The L-COM main device test result will be displayed in this row. If the
particular device works properly, the result of this test will be “Okay”, alternatively an error code will
be displayed and the entire boot of the 4HD/5HD-CPU will stop. Each main device will be displayed with
a different code:
Test QVis-X: QVision camera connected to an AMF XL/XLi series pinspotter.
Test QVis-Q: QVision camera connected to an AMF non XL/XLi series pinspotter.
Test FBox: this test will be displayed under the Test QVis-Q row only if an FBox
pinspotter interface has been installed and configured.
Test QAll-X: this test will be displayed if an MVision camera with an ALL/XL pinspotter interface
has been installed with AMF XL/XLi series pinspotters.
Test TV: This test will be displayed under the Test QAll-X row to test the presence of the
MVision camera.
Test TV: This test will be displayed if a TVision camera with FBox or Six pinspotter interface has
been installed.
Test FBox: this test will be displayed under the Test TV row only if a TVision camera
with an FBox pinspotter interface has been installed and configured.
Test QAll-o: QBK-Corde pinspotter interface (string machine interface).
Test QAll-m: ALL pinspotter interface, for Mendes MM2001, ME90 or Qubica MAG3IT, TMS
pinspotters.
Test QAll-s: ALL-GS pinspotter interface, for Brunswick GS series pinsetters (not NEXGEN).
Test QAll-g: ALL pinspotter interface, for Brunswick GS X NEXGEN series pinsetters.
3. Terminal board test: the test result of the terminal board connected to the 4HD/5HD-CPU unit will be
displayed in this area. If there are no terminal boards installed, the result of this test will be “None” and
the boot-up of the 4HD/5HD-CPU unit will continue as usual. If the particular device works properly, the
result of its test will be “Okay”, alternatively an error code will be displayed and the entire boot of the
4HD/5HD-CPU will stop. Every different type of terminal board is displayed with a different code:
To Next Page
Loading...