BES X Installation Manual, Rev.9, Jun 2018 Replacements
P/N: 400288005 157
Press OK in the LANE CONTROL BOX REPLACEMENT window;
Press YES in the Warning window that asks if you are sure you want to replace the LANE CONTROL
BOX;
Wait for the ConquerorPRO to process the request;
NOTE: This procedure will take almost an hour to finish. DO NOT switch off the BES X system during
this process.
When the whole process is completed, a confirmation message (LANE CONTROL BOX REPLACED)
will appear. Press ok to close the message box.
Refer to the paragraph “12.3 – How to upload animations to the 4HD/5HD-CPU units” in order to
correctly upload the animations to the new 4HD/5HD-CPU.
To Next Page
Loading...