QubicaAMF BES X - Centers with up to 12 Lanes; Centers with up to 12 Lanes with Single Channel Video Server

Scoring network BES X Installation Manual, Rev.9, Jun 2018
68
68 P/N: 400288005
5.2 - Centers with up to 12 lanes
If the bowling center has up to 12 lanes just one network switch for the scoring network is needed.
When MMS digital, TCS or Q-COM systems are purchased, QubicaAMF will supply additional switches and
the scoring network will have different configurations.
Please refer to the correct sub section for the desired configuration.
5.2.1 - Centers with up to 12 lanes with single channel video
server.
One 8 ports network switch will be supplied by QubicaAMF for this configuration.
The connections for the main scoring network switch are:
 1 port for the home-run cable;
 1 port for the single channel video server;
 6 ports for the 4HD/5HD-HUB units.
The 4HD/5HD-HUB units have to be connected to the main scoring network switch via standard patch
network cables. Refer to tables T.20.079 and T.20.096 for standard installations or to table T.20.082 if XLi
pinspotters with safety kit are present for the correct patch cables’ length.
The single channel video server, if present, have to be connected to the main scoring network switch using
a Cat.5e solid network cable.
The second network card of the ConquerorPRO server have to be connected to the main scoring network
switch using a Cat.5e solid network cable.
This configuration is described in the table T.20.091.