QubicaAMF BES X - Page 94

Overhead monitors BES X Installation Manual, Rev.9, Jun 2018
92
92 P/N: 400288005
SAMSUNG MD SERIES MONITORS:
How to enable the “JUST SCAN” (or “Screen Fit”) option:
If the image displayed on the monitor is larger than the monitor screen, follow this procedure in order to
have a correct aspect ratio:
 Enter the main menu of the monitor by pressing once the “Menu” ( ) button on the remote
control.
 Navigate to the “Picture” menu, using the arrow buttons and press the “Enter” ( ) button on the
remote control.
 Navigate to the “Screen Adjustment” sub menu and press the “Enter” ( ) button on the remote
control.
 Navigate to the “Picture Size” sub menu and press the “Enter” ( ) button on the remote control.
 Select the “Just Scan” (or “Screen Fit”) option and press the “Ok” ( ) button on the remote
control.
 Once finished, press many times the “Exit” ( ) button on the remote control to exit from the
menu.
LG 32LM549C, 32LY330C-ZA, 32LY340C-ZA, 42LY330C-ZA, 47LY330C-ZA MONITORS:
How to enable the “JUST SCAN” (or “Screen Fit”) option:
If the image displayed on the monitor is larger than the monitor screen, follow this procedure in order to
have a correct aspect ratio:
 Enter the main menu of the monitor by pressing once the “Settings” button on the remote control.
 Navigate to the “Picture” menu, using the arrow buttons and press the “OK” button on the remote
control.
 Navigate to the “Aspect ratio” sub menu and press the “OK” button on the remote control.
 Select the “Just Scan” (or “Screen Fit”) option and press the “OK” button on the remote control.
 Once finished, press many times the “Exit” button on the remote control to exit from the menu.