EasyManua.ls Logo

Quectel BG950A-GL - Reference Design; Reference Design of RF Routing

Quectel BG950A-GL
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LPWA Module Series
BG950A-GL&BG951A-GL_Hardware_Design
59
/89
5.2.3. Reference Design
The following is the reference circuit of GNSS antenna.
Figure 24: Reference Circuit of GNSS Antenna
.
5.3. Reference Design of RF Routing
1. Tracking sensitivity: the lowest GNSS signal value at the antenna port on which the module can keep
on positioning for 3 minutes.
2. Re-acquisition sensitivity: the lowest GNSS signal value at the antenna port on which the module
can fix position again within 3 minutes after loss of lock.
3. Cold start sensitivity: the lowest GNSS signal value at the antenna port on which the module fixes
position within 3 minutes after executing cold start commands.
The module of BG950A-GL & BG951A-GL are designed with a passive antenna.
NOTE

Table of Contents

Other manuals for Quectel BG950A-GL

Related product manuals