13
PC Software
Device settings can be changed using the PC Software. The mouse will work
at the default settings without the software but we recommend that you in-
stall the PC software and configure your personal settings. The software will
run on computers installed with the latest Windows operating systems.
Software installation
Install the PC software from the included CD. The installation program
starts when the disc is inserted to the CD-ROM drive. If the installation pro-
gram does not start automatically you can run setup.exe program manually
and follow the on-screen instructions.
When the installation is complete, you will have two programs on your com-
puter; Quha Zono Initialisation and Quha Zono Settings. The motion config-
uration is set with Quha Zono Initialisation program; any other settings are
configured with Quha Zono Settings program.
EN
EN
To Next Page
Loading...