EasyManua.ls Logo

Quick R02 User Manual

Quick R02
48 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REV 003a
High
Quality
Nautical
Equipment
Manuale di installazione ed uso RICEVITORE RADIOCOMANDO RRC
Manual of installation and use RRC RADIO CONTROL RECEIVER
Mode d’installation et d’emploi RÉCEPTEUR RADIOCOMMANDE RRC
Installations- und Benutzerhandbuch FUNKFERNSTEUERUNG EMPFÄNGER RRC
Manual de instalación y uso RECEPTOR RADIOMANDO RRC
RRC RADIO CONTROL RECEIVER
R02
R04
R06
R08
R10
R12
IT
EN
FR
DE
ES
Question and Answer IconNeed help?

Do you have a question about the Quick R02 and is the answer not in the manual?

Quick R02 Specifications

General IconGeneral
Frequency Range433.92 MHz
Input Impedance50 Ohm
Output Impedance50 Ohm
Power Supply12-24 VDC
Current Consumption50 mA
Operating Temperature-20°C to +70°C
Dimensions80 x 58 x 26 mm
Weight100 g

Summary

Product Overview and Installation Guidance

RRC Radio Control Receiver Characteristics

Device description, advantages, and intended use on recreational crafts.

General Installation Precautions

Read manual, contact retailer for doubts, installer responsibility, package contents.

Installation Procedures

RRC Radio Control Receiver Installation Guide

Typical installation, location, mounting, and EMC distance requirements.

Installation Safety and Best Practices

Drilling precautions, EMC compliance, minimum distances from equipment.

Electrical Connections and Wiring

RRC Radio Receiver Wiring Diagrams

Wiring diagrams for R02-R04 and R06-R08-R10-R12 models.

Electrical Connection Procedure

Powering, terminals, switches, wire sizing, fuses, safety warnings.

Connection Examples and Antenna Setup

RRC Receiver Connection Diagrams

Wiring examples for R02-R04 and R06-R08-R10-R12 models.

External Antenna Installation

Steps for removing internal antenna and connecting external antenna.

Initial Operation and Status

Receiver Start-up Sequence

Describes initial LED and display behavior upon power connection.

Awaiting Signal Status

Indicates the receiver is ready for command or configuration, ON/OFF LED flashes.

Receiver Configuration and Programming

Entering the Configuration Menu

How to access the receiver's configuration menu using the button.

Programming without Translation (P)

Stores transmitter ID in memory, maps transmitter buttons to receiver relays.

Programming with Translation (S)

Stores transmitter ID and maps relays for controlling multiple receivers.

Advanced Configuration Options

Filter Function (F)

Selects interference noise filtering modes (LOW, AVERAGE, HIGH).

Erasing Receiver Memory (E)

Deletes all stored transmitter IDs from the receiver's memory.

Exiting Configuration Menu

Procedure to exit the receiver configuration menu.

Radio Receiver Operation

Command Reception and Relay Activation

Describes LED indicators and relay activation upon receiving a transmitter command.

System Errors and Faults

Startup Errors

Flash checksum error, requires contacting customer service.

Automatic Reset Problems

Low power supply voltage, resets when voltage is restored.

Troubleshooting Signals

Memory and Transmitter Signals

Memory full, duplicate/invalid/missing transmitter IDs, translation issues.

Data and Signal Integrity Signals

Data packet errors, low RSSI level, interference.

Maintenance and Technical Specifications

Maintenance Recommendations

Annual check of cables and electrical connections for optimal operation.

Technical Data Summary

Input/output characteristics, frequency, modulation, operating temp, dimensions, weight.

Product Dimensions

RRC Receiver Dimensional Drawings

Diagrams showing the physical dimensions of the RRC receivers.

Product Identification and Company Information

Product Code and Serial Number

Information on how to find the product code and serial number.

Manufacturer Contact Details

Contact information for QUICK S.p.A., including address, phone, and fax.

Related product manuals