on Appendix Sheets 1,2,& 5 for the center and side console vertical
pieces, as will as for the top side console pieces. Make 2 of each
from the'3/8" thick white foam and number them left, right, and
center, to identify where they are assembled in the aircraft. (In
airplane talk, left is the pilot's left as he sets in the cockpit.)
Fiberglass 1 BID on the inside face of each piece. The inside face is
the side that does not show after the consoles are assembled. Do not
glass the other side.
CONTINUED ON NEXT PAGE
PAGE 4-1
To Next Page