Quickie Q2 - Page 287

To Next Page

To Previous Page

MAIN WING TIPS

..... Now would also be a good time to carve wing tips on the main wing.

If you wish, you may add up to 3 inches of foam to the wing span to

facilitate a smooth looking wingtip. Keep it simple, however.

VERTICAL FIN TIP

..... Ditto for the tip of the vertical fin.

VERTICAL FIN ATTACHMENT

..... Previously, you mounted the vertical fin to the bottom of the

fuselage. Now is the time to permanently attach it to the fuselage and

create a pleasing fillet shape at the same time. Using pieces of foam,

fill the gap between the vertical fin and the aft fuselage. Carve the

foam down to a pleasing shape, as shown, and laminate 2 BID overlapping

onto the aft fuselage skin a minimum of 2 inches.