To Next PageTo Next Page
Need help?Do you have a question about the quiko QK-CE220RL4 and is the answer not in the manual?
General| Brand | quiko |
|---|---|
| Model | QK-CE220RL4 |
| Category | Control Panel |
| Language | English |
Lists and illustrates the control board's components and their physical layout.
Explains the procedure for resetting fuses after a short-circuit event.
Details the terminal block connections for inputs and outputs on the control board.
Provides a summary of all configurable motor settings (e.g., time, force, thresholds).
Summarizes key general operational functions like automatic closure, pedestrian modes, and photocell logic.
Outlines the programmable functions for each terminal block input.
Summarizes radio control features and button operations for user interaction.
Details courtesy functions such as default restore and display interpretation.
Step-by-step guide for installing the radio module into the antenna housing.
Details connections for 230 VAC power supply and the motor.
Explains wiring and configuration for input terminals (START, STOP, LIMIT SWITCHES, PHOTOCELLS, etc.).
Information on connecting optional QK-ELOCKM and QK-SMARTM modules.
Defines different types of inputs and how they are activated by the control board.
Defines start commands, safety commands, and working cycle types (standard, pedestrian).
Configures standard working time and slowdown working time for motor operation.
Adjusts motor start-up time and force levels during operation.
Sets thresholds for obstacle detection and motor brake duration.
Describes two primary sensor operating modes: Obstacle Detection and Limit Switch.
Explains how parameters affect sensor behavior in different operating modes and phases.
Configures automatic closing time and pedestrian working cycle parameters.
Defines start command functionality and photocell logic configurations.
Details electric lock, cold winter, and recovery loop functions for enhanced operation.
Covers photocell testing and motor thermal status checks for troubleshooting.
Procedures for saving, erasing, and managing remote control keys.
Explains the functions assigned to remote keys: Start, Stop, Pedestrian, Fast Closure.
Configures inputs 1-4 for functions like Start, Stop, Photocell, and QK-SMARTM.
Configures inputs 5-7 for Limit Switches, Pedestrian functions, and QK-SMARTM.
Restores the control board to its factory default settings.
Semi-automatic procedure to acquire and program motor working times.
