1.2 Units
1.3 Languages
1.4 Tones
1.5 Sleep
SETTINGS APP
You can change the unit for the temperature and tide information.
Go in the UNITS menu, select TEMPERATURE and you can toggle the unit °C / °F by using (+) / (-) and SET keys.
Same thing for tide, select TIDE and you can set the water height unit with METERS, FEET or COEF.
Quiksilver developed the DEEP X to be user friendly. You can set here the menu language and choose between En-
glish, French, Spanish or Portuguese. Set your correct language and all DEEP X menus will be translated!
In this setting mode, you can toggle the key tone, hourly chime & tide chime ON/OFF by using (+) / (-) and SET keys.
The TIDE CHIME function will help you to know if the tide is high or dead low using different tones: increasing bip
tones when tide is low and going to come in and decreasing bip tones when tide is high and out going.
Sleep mode is a bettery saving mode that allows you to set your watch so it turns the display off while you are
sleeping. The watch can be turned back on by simply pressing any button. If any key is pressed including EL while in
Sleep the display will wake up temporarily, and will go back to Sleep after 30 seconds of no key press.
Normal display will resume immediately after the Sleep setting has been turned OFF. If an Alarm occurs while in
Sleep, the display will temporarily wake up for the duration of the Alarm, and goes back to Sleep afterwards.
34
To Next Page
Loading...
