Page 18
Micro USB port
Battery Operations
Charging the battery
>>
If you hear a cadent tone while using the helmet, the
battery might be almost drained-out and should be
charged before continuing to use.
>>
To charge, gently pull out the charging port using the
red tab.
>>
Connect a micro-USB cable to the charging port to your
charging adapter or to your Desktop/Laptop.
>>
If the battery is less than 2% of its limit, the Helmet and
its features might behave erratically. Please charge the
helmet before using again.
>>
If the battery is not sufciently charged, the Quin
Design Helmet’s features may not work properly and
may lead to failure in helmet features case of any
crash/emergency.
Micro-USB
Battery Charging Indication
Battery fully Charged Indication
When charged, indicator will flash
red continuosly
While charging, indicator will blink red
To Next Page
Loading...