Page 20
Care and Cleaning
Cleaning the Helmet
Warning
Danger
Use soft cloth with warm water & mild detergent.
Never use hot water, gasoline or any other solvents.
Dropping your helmet onto hard
surfaces and other rough handling
may damage the painting surface
and/or decrease its ability to
protect.
IF THIS HELMET IS SUBJECTED TO AN IMPACT IT
SHOULD NOT TO BE WORN.
>>
Do not wear the helmet after for any reason, even if
there is no visible damage to the shell.
>>
The helmet is made for absorbing an impact through
an alteration or partial destruction of some of its parts,
and damage may not be visible externally. For this
reason, the helmet must be replaced after an impact.
>>
Damage to the helmet after an impact is not a sign of
any defect in the helmet design or contruction. It is
exactly what the helmet is intended to do.
DO NOT MODIFY YOUR QUIN DESIGN™ HELMET.
Modifying your helmet may increase your risk of
serious injury or death in an accident.
To Next Page
Loading...