1 Install Rear Wheels
Press the button in while
sliding the rear wheel axle
into the frame until you
hear a “click” (Figure 1).
Repeat for other rear
wheel. Pull to confirm it is
assembled securely.
3
3 Install Front Wheel
Assembly
Squeeze the front wheel
fork while inserting it into
the frame tube. Push front
wheel fork into frame tube
until you hear a “click”
(Figure 3).
Pull to confirm
it is assembled securely.
2 Attach Shopping
Basket
Slide tab into tube at
the front center (Figure
2). Secure an adhesive
strap around frame
above each rear wheel
(Figure 2a).
2
3
4
4a
4 Unfold Stroller
Unfasten the transport
hook and push the handle-
bar upward
(Figure 4).
The frame will unfold
itself. The handlebar will
lock into place with a
“click”
(Figure 4a).
2a
5 Adjust Handlebar
Height
Squeeze the adjustment
button and slide the han-
dlebar to desired height
(Figure 5). The handlebar
will click into place.
5
6 Parking Brake
Always use the parking
brake, even when standing
still for only a few moments!
Push down on the red
pedal (P) behind the rear
wheel to set the parking
brake
(Figure 6). Push the
opposite pedal to release
the parking brake.
6
NOTE: The Buzz
TM
frame has a
unique mechanism that enables
the automatic unfolding of the
frame. The temperature can
effect the functioning of this
mechanism. In cold or frosty
weather, the Buzz
TM
may unfold
more slowly than usual (at
room temperature).
1
To Next Page
Loading...
Need help?
General
