Enjoying Your Speakers (continued)
Audio output of the Air can be used to connect to an alternate audio system, such as a home theater system, or a TV, by plugging the audio cable into the “OUT” jack on the Air and to the “line
in” of the audio system of your choice.
Connection Lost?
If pairing to the speakers does not work, turn o the speakers and repeat the steps again in “Using Speakers.”
Make sure your speakers are within range of your smart device.
If you hear a long beep or a voice indicating low battery, you need to recharge your speakers. Connection may be lost due to low battery.
When charging your speakers, only use the enclosed USB cable.
4
To Next Page
Loading...
General