Quick Start Guide
Qwerkywriter
Charging your Qwerkywriter!
Using the included micro USB cable, plug it into any USB hub or a
powered USB port (Be sure to check the correct orientation before
inserting the micro USB. Smaller lip is UP). It takes 2-3 hours to fully
charge the Qwerkywriter. After it’s fully charged, the red light goes out.
A single charge can hold upto 1 to 3 months of heavy use. The ‘Low
battery indicator’ LED (see over - LED’s Explained) will let you know
if you need to recharge your Qwerkywriter. The Qwerkywriter will
automatically go to ‘Power Save Mode’ after 1 minute of inactivity. But
you can always power off the device as well. Powering OFF, turning
back ON, and pressing the CONNECT button will also allow you to
quickly connect to other devices.
This does NOT connect the Qwerkywriter via USB. The USB port only
CHARGES the Qwerkywriter.
The Qwerky Key
The
button is our logo, but it also doubles as either the WIN button
(Windows) or the CMD button (MacOS).
Plug into spare USB port to charge
Connect to miniUSB port on rear of keyboard.
Charging takes 2-3 hours
For detailed info, visit www.qwerkywriter.com/pages/gettingstarted for a video tutorial.
Integrated Tablet Stand
The Qwerkywriter features an integrated tablet stand that can support a
wide range of tablets up to 10 inches and 1/2 inches thick. This includes
almost all generations of iPads, iPad Mini, Samsung Galaxy, Nexus, and
more. It can support both portrait and landscape modes.
twitter.com/qwerkywriter
facebook.com/qwerkytoys
Qwerkytoys, Inc.
712 Bancroft Road, Suite 234, Walnut Creek, CA 94598
Email: support@qwerkytoys.com
Contents:
Qwerkywriter Keyboard, Micro USB charging cable
& Quick Start Guide.
To Next Page
Need help?
General
