Need help?Do you have a question about the R.V.R. Elettronica PTX-LCD and is the answer not in the manual?
General| Brand | R.V.R. Elettronica |
|---|---|
| Model | PTX-LCD |
| Category | Transmitter |
| Language | English |
Procedures for providing first aid to victims of electrical shock.
Procedures for treating electrical burns.
Explanation of how to interact with the exciter's control software using the encoder.
Steps for unpacking, checking, and preparing the transmitter for operation.
Instructions for powering on the exciter and initial operation sequence.
Details on adjusting trimmers for output power and modulation levels.
Details and explanation of the controls and indicators on the front panel.
Description of connectors and components on the rear panel.
Description of the rear panel connectors for the AUDINP-DIG option.
Description of the rear panel connectors for the TRDSP option.
Description of the rear panel connectors for the GSM option.
Detailed description of the various connectors used on the device.
Describes the process when the exciter is powered on and initial display.
Introduction to the PTX-LCD menu system structure and navigation.
Visual representation of the standard menu structure for system parameters.
Visual representation of the telemetry option menu structure.
Explanation of the status bar elements and their meaning.
Section detailing the administration menu for device configuration.
Checking status indications via front panel lights and menus.
Using PC software for detailed system monitoring and settings.
Enquiring system status using a GSM phone via SMS commands.
Requirements for SIM card configuration for data/fax service.
Instructions for configuring the Radio Modem Box for connection.
Configuring PTX-LCD parameters using TELECON software for remote reporting.
Monitoring PTX-LCD parameters via PC with modem connection.
Using the built-in modem for remote operations.
Dimensions, weight, and operating temperature of the unit.
Electrical characteristics, including RF output, modulation, power supply, and inputs.
List of optional features and their specifications.
Specifications for the Digital Audio Input interface option.
Specifications for the TRDSP option, including analogue and digital audio inputs.
Factory settings for the CCIR frequency band.
Factory settings for the FCC frequency band.
Factory settings for the OIRT frequency band.
Factory settings for the JAPAN frequency band.
Factory settings for the ITALY frequency band.
Factory settings for the C.S.I frequency band.
Top view diagram and list of inner components.
Instructions on how to safely remove and access internal modules.
Description of the two power supply sections and their functions.
Indicators and adjustable components on the power supply card.
Description of the board providing interface between audio and other cards.
Indicators and settings on the audio mainboard.
Location and description of the audio input section.
Adjustments and indicators for the audio input section.
Description of the coder card (Stereo/Mono/MPX) and its circuits.
Adjustments and indicators for the coder card.
Description of the PLL/Driver and VCO cards for frequency generation.
Adjustments and indicators for the PLL/Driver & VCO cards.
Description of the power amplifier stage and its operation.
Description of the card providing interface between CPU and other cards.
Jumper settings and indicators on the panel card.
Description of the CPU card, its specifications, and firmware update.
Description and features of the optional telemetry card.
Display of the state of the optional add-on telemetry card.
Description of the optional SLTELEM00002 telemetry card.
TLC/TLS menu settings for the SLTELEM00002 telemetry card.
Option for integrating digital audio distribution.
Description of the DSP-based TRDSP card for enhanced performance.
New screens for TRDSP parameters in the administration menu.
RF status parameters when the TRDSP card is installed.
Stereo coder configuration menu for TRDSP.
Optional TRDSP card setup menu.
Setup menu for ITU and AGC features.
Setup menu for isofrequency mode operating parameters.
Setup menu for FSK signalling.
To Next Page
