Do you have a question about the R2TECK DVLM-100 and is the answer not in the manual?
Model | DVLM-100 |
---|---|
Category | Extender |
Type | Wireless HDMI Extender |
Connector Type (Local Unit) | HDMI |
Connector Type (Remote Unit) | HDMI |
Frequency Band | 5GHz |
Button | Pairing button |
Antenna | External |
Ports | HDMI, USB |
Operating Humidity | 10% to 90% (non-condensing) |
Storage Humidity | 5% to 95% (non-condensing) |
Instructions for connecting and operating the monitor, transmitter, receiver, and mobile device.
Details communication distance, output power, sensitivity, and frequency.
Information on working temperature, storage, dimensions, and weight.
Voltage requirements and suggestions for transmitter and receiver power.
Legal disclaimer regarding product use, modification, and responsibility.
Details about the manual's scope, content, and company rights.
Specifies the product's purpose for wireless Full-HD Digital Video transmission.
Warnings about operating and maintaining the product correctly, and checking cables.
Overview of the DVLM-100 system's features: 1080p Full-HD wireless video transmission.
Lists main product parts, antennas, and transmitter/receiver cables.
Details the back side ports of the transmitter, including BIND and FREQUENCY SWITCH.
Details the right side ports of the transmitter: HDMI, Power, and indicator lights.
Details the left side ports of the receiver, including FREQUENCY SWITCH, BIND, and POWER.
Details the right side ports of the receiver: DC-12V, HDMI, and USB.
Details the front side ports of the receiver, including INFO, Power, Audio, and Video buttons.
Steps for installing transmitter antennas, HDMI cable, and power cable.
Steps for installing receiver antennas.
Steps for connecting the HDMI cable to the receiver.
Steps for connecting the power cable to the receiver.
Instructions for installing the mobile APP on iOS and Android devices.
Instructions for changing the operating frequency of the transmitter and receiver.
Process for binding one transmitter with one receiver for connection.
Explains the purpose of software upgrades for transmitter and receiver.
Step-by-step guide for performing software upgrade via U-disk.
Describes screen displays during the software upgrade process.
Troubleshooting common issues encountered during software upgrades.
How to configure OSD information display (On/Off) via the mobile APP.
How to adjust and confirm output power settings (e.g., 100mw) using the APP.
Lists common device symptoms, diagnoses, and recommended solutions for troubleshooting.
Specifies supported video input and output resolutions and formats (PAL/NTSC).
Describes the information displayed on the monitor's OSD, such as signal intensity and power.
Company address, phone, fax, website, and email for technical support and suggestions.