Race Face Aeffect R Stem Installation
Required FOX Tools:
• 4mm Hex Wrench
• Torque Wrench
WARNING: Race Face products should be installed by a qualified bicycle service technician, in accordance with
Race Face installation specifications. If you have any doubts as to whether or not you can properly install this
stem on your bicycle, defer to a professionally trained bicycle service technician. Improper installation, usage
or maintenance of this product may lead to loss of control of the bicycle and result in premature component failure
and/or serious personal INJURY OR DEATH.
WARNING: Carefully read all instructions, which are also available on RaceFace.com, before installing Race Face
components. If installing Race Face components in conjunction with another manufacturer’s components,
always follow the manufacturer’s instructions in addition to the recommended practices included in this
manual for proper installation procedures. Failure to read, understand, and apply this entire document could result in
mechanical malfunction or component failure, which may lead to loss of control, a crash, SERIOUS INJURY AND/OR
DEATH. If there is anything in these instructions which you do not understand, please consult with your Race Face dealer
before proceeding.
To Next Page
Need help?
General
