Need help?Do you have a question about the Racepak IQ3 Drag Dash and is the answer not in the manual?
Comprehensive list of the IQ3 Drag Dash's capabilities, including programmable items, LEDs, and inputs.
Details the specific data points available for display on the IQ3 Drag Dash from the engine control unit.
Details available V-Net and internal sensor channels for data acquisition and logging.
Specifies input voltage range, current draw, and reverse voltage protection for the device.
Outlines the necessary PC specifications, including OS and USB port, for using the DataLink software.
Describes the DataLink software used for setting up, configuring, and programming the IQ3 Drag Dash.
Provides the physical dimensions of the IQ3 Drag Dash unit for installation planning.
Details front-facing components like shift lights, warning lights, and the micro SD card slot.
Describes rear connectors including V-Net, 34-pin, and USB ports for connectivity.
Provides a template and measurements for unit mounting and drilling.
Covers general mounting requirements, heat, electrical interference, moisture, and cleaning.
Instructions for connecting the power supply and ensuring proper grounding.
Details requirements for the engine RPM signal input.
Information on the microSD card used for data recording.
Detailed table mapping pin positions to descriptions, colors, and wiring functions for the main connector.
Explains how to connect additional sensors using stackable V-Net modules and extension cables.
Shows the default channels displayed on the first four pages of the IQ3 Drag Dash, configurable via software.
Describes modes like Setup Mode and Start Recording for button functionality and programming.
Explains how to use buttons for basic programming, navigation, and parameter adjustment.
Details how to program basic features like screen brightness, LED brightness, and resets using buttons.
Installation and configuration details for oil pressure and water temperature sensors, including part numbers and scaling.
Step-by-step guide for installing the driveshaft RPM sensor and magnet kit for accurate speed measurement.
Lists selectable ECU settings and describes the wiring for connecting to vehicle ECUs via CAN bus.
Provides detailed, step-by-step instructions for installing the DataLinkII software on a PC.
Explains how to load and use factory car configuration files for standalone or V-Net systems.
Instructions for configuring COM port settings for reliable communication between PC and the IQ3 Drag Dash.
Steps for reading the current configuration from the dash and syncing it with the DataLink software.
How to select and configure the appropriate ECU type within the DataLink software for data integration.
Detailed guide on how to program the four configurable display pages using the DataLink software interface.
Details on setting up warning channels, low/high limits, and associated text for visual alerts.
A practical example demonstrating how to configure warning lights and text based on sensor values.
Explains the relationship between raw data files, configuration files, and the DataLink software for analysis.
Procedure to set the internal clock and date of the IQ3 Drag Dash for accurate data file stamping.
Steps to delete data files from the microSD card to manage storage and prevent capacity issues.
Describes manual activation via button press and automatic activation based on sensor thresholds.
How to define the specific data channel that triggers the recording process.
How to set a threshold value for automatic recording initiation based on channel data.
Steps to upload recorded data from the SD memory card to the PC using the DataLink software.
How to name and store uploaded data files with session information like year, track, and race type.
Configuring selected channels to be displayed and monitored during a real-time telemetry session.
Setting parameters like circular buffer length and recording mode for real-time telemetry sessions.
Methods for accessing help within the DataLink II software, including F1 key, icon toolbars, and menu selections.
How to select and enable the appropriate ECU type for data integration via the Dash Info tab.
Steps to resolve communication issues between DataLink software and the IQ3 Drag Dash, including COM port checks.
Troubleshooting steps for V-Net channels experiencing interference or lock-ups, suggesting proximity checks.
To Next Page
General