14.7.4 Short press [SET] for the fourth time and short press
[MODE]. The first frequency in front of (UBD) will flash. Short
press [STEP] " " to adjust bit values.
Short press [TUN “ , ”] to select appropriate low & high
frequency ranges and select frequency points required for
customization. Then long press [MODE] for 2 seconds to set
the updated frequency range; the frequency number stops
flashing (adjustable frequency range: 30MHZ-520MHZ).
15. WX (North American weather bands)
WX has 7 fixed frequency points:
162.400MHZ, 162.4250MHZ, 162.4500MHZ, 162.4750MHZ,
162.5000MHZ, 162.5250MHZ, 162.5500MHZ
Under WX state, press [TUN “ , ”] to select frequency points needed.
In the US, these channels are wideband FM. The bandwidth needs to be
set to 15 kHz.
Long press SET to enter ALERT mode and SCAN......will be displayed.
When the early warning signals are received, the early warning receiving
channel will be automatically started. Long press SET again to remove the
early warning receiving mode.
RF760 Full-Band Radio
23
To Next Page
Loading...
