Radient RC Reaktor Series User Manual

...REAKTOR SYSTEM OVERVIEW
6
Reaktor Brushless Power Systems
By Radient RC
chassis, tires and tracks.
› Multiple protection features: Low voltage cut-off protection for LiPo or NiMH battery
Over-heat protection.
› Easily programmed with the “SET” button on the ESC or with the LED Program Card
(fan equipped models only).
Once you have completed installing your Reaktor power system you should double check
the wiring for damage or loose connections to ensure everything is in working order before
use. Refer to the diagram below to check the connections of your electronics system. Some
brushless motors such as the Reaktor included with your vehicle use only black wires, this is
okay. On sensorless brushless systems the motor will change operating direction when any
two of the motor wires are swapped.
The Reaktor ESC is programmed to communicate with you, letting you know its status.
• LED Status:
› In normal use, if the throttle trigger is in the neutral range, neither the red LED nor
the green LED light up.
› The red LED lights when the car is run forward or backward and it will flash quickly
when the car is braking.
› The green LED lights when the throttle trigger is moved to the full throttle position.

Radient RC Reaktor Series Specifications

General

Brand	Radient RC
Model	Reaktor Series
Category	Power Supply
Language	English