Making a DirectLink Call
To call another handset with DirectLink, press the DirectLink
soft key.
Select the handset you want to call by pressing the number
key (0-9). If the handset is out of range or not in DirectLink
operation, the display shows OUT OF RANGE.
To exit DirectLink, press the CANCEL soft key.
On the receiving handset, press the ANSWER soft key or
/FLASH.
Exiting a DirectLink Call
To exit the DirectLink feature and return to standby, press the
CANCEL soft key and then press the OK soft key.
DIRECTLINK MODE CANCEL appears in the display.
Intercom
Making an Intercom Page
You can use the intercom to talk to another station without using
the phone line.
With the phone in standby, press INT’COM/HOLD.
Use or to select the station you want to talk with,
and then press the OK soft key. If you select ALL, all other
registered handsets and base will be paged. An intercom tone
sounds. To cancel intercom, press or the CANCEL soft key
on either handset (or INT’COM/HOLD or the CANCEL soft key
on the base).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the
ID of the station that is paging.
1.
2.
3.
1.
2.
To Next Page
Loading...
