Radio Shack Amplified VHF/UHF/FM Indoor Antenna - User Manual

OWNER’S MANUAL — Please read before using this equipment.
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
Amplified VHF/UHF/FM Indoor Antenna
Your RadioShack Amplified VHF/UHF/FM In-
door Antenna boosts signals by 10 dB to pro-
vide clearer television reception. The
antenna has adjustable telescoping, chrome-
plated VHF/FM elements for better VHF/FM
reception. The multi-position tuning control
provides improved VHF picture quality and
you can adjust the UHF reflector dish for bet-
ter UHF reception. The antenna comes with
a 3-foot, 75-Ohm coaxial cable for use with
cable-ready televisions.
Cautions:
You must use a Class 2 power
source that supplies 9V DC
and delivers at least 100 mA.
Its center tip must be set to positive and
its plug must fit the antenna's
9V DC
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the antenna or the
adapter.
• Always connect the AC adapter to the
antenna before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you dis-
connect it from the antenna.
INSTALLATION
1. Screw the telescoping VHF/FM antenna
elements into their holders.
2. Connect the supplied coaxial cable
between the antenna’s
75-OHM
connec-
tor and the TV or FM radio’s 75-ohm
connector.
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product’s case.
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accom-
panying this product.
!
!
!
Coaxial
Cable
9V DC
Adapter
TV or
FM Radio
Antenna
9V DC
Jack
75 OHM
Connector
75 OHM
Connector
15-1828.fm Page 1 Thursday, October 26, 2000 9:51 AM

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Specifications

General

Brand	Radio Shack
Model	Amplified VHF/UHF/FM Indoor Antenna
Category	Antenna
Language	English

Summary

Antenna Setup and Safety

Power Adapter Cautions

Use a Class 2 power source supplying 9V DC and at least 100 mA. Ensure correct polarity.

Electrical Safety Precautions

Avoid exposing the product to rain or moisture. Do not remove covers to prevent shock risk.

Installation Procedure

Install Telescoping Elements

Screw the telescoping VHF/FM antenna elements into their holders.

Connect Coaxial Cable

Connect the supplied coaxial cable between the antenna and the TV/FM radio.

Connect Power Adapter

Connect the AC adapter to the antenna before powering it from AC.

Antenna Positioning and Mounting

Place antenna on TV or mount on wall, ensuring unrestricted movement.

Operation and Tuning

VHF;FM Tuning

Set VHF/UHF switch to VHF, adjust rotary knob for best VHF/FM picture and sound.

UHF Tuning

Set VHF/UHF switch to UHF, move reflector dish for best UHF picture and sound.

Reception Improvement Tips

Adjust element length or angle for better reception in weak-signal areas.

Warranty Information

Limited Ninety-Day Warranty

Product warranted against manufacturing defects for 90 days from purchase date.