10
SPECIFICATIONS
Input Voltage...........................................................110 to 120V AC
Input Frequency......................................................................60 Hz
Output Voltage ................................................13.8V DC±±0.5 Volts
Output Current .........................3 Amps DC Continuous (Maximum)
Line Regulation ....................................................... Less Than ±5%
Load Regulation...................................................... Less Than ±5%
Overload Protection ................................Circuit Breaker 2.5A/>50V
Output Ripple..............................................................100 mV RMS
Design........................................................................... Linear Type
Operating Temperature..................................................32 to 104°F
(0 to 40°C)
Storage Temperature ...................................................–13 to 158°F
(–25 to 70°C)
Input Cable...................18 AWG x 2C W/1-15P Plug, SPT-2 6 Feet
Output Terminal...............................Binding Post 10 Amp/125 Volts
Power Switch .......................................... Illuminated, 15A/125 VAC
Dimensions .......................................3
1
/
4
x 4
7
/
8
x 8
1
/
4
Inches (HWD)
(82 x 124 x 210 mm)
Weight.................................................................5.18 lbs (2.35 kgs)
Specifications are typical; individual units might vary. Specifications
are subject to change and improvement without notice.
22-504.fm Page 10 Friday, August 6, 1999 12:52 PM
To Next Page
Loading...
