8
CONNECTING A DEVICE REQUIRING A
CIGARETTE-LIGHTER SOCKET
1. Turn off the device requiring power.
2. Set the power supply’s POWER switch to OFF (
0
).
3. Open the cigarette lighter socket’s cap on the front of the
power supply.
Note:
Be sure to close the cigarette lighter socket’s cap when
you are not using the socket.
4. Connect the device’s vehicle DC power cord to the power sup-
ply’s cigarette lighter socket.
5. Connect the power supply’s AC cord to a standard 120V AC
outlet.
22-504.fm Page 8 Friday, August 6, 1999 12:52 PM
To Next Page
Loading...
