FINE l\JNING
To fine tune f
or
the best reception, press
FINE
.
FINE
appears.
Press TU
NIN
G
/\
or v to tune by 1 kHz/step for the MW/LW bands
and
0.05 MHz/step f
or
t
he
FM band.
Using
th
e
AM
SENS
D
X/
LOCAL
Switch
To reduce interference from adjacent sta
ti
ons in the
SW
, MW, or
LW bands, set
AM
S
EN
S D
X/
L
OC
AL to
AM
S
EN
S LO
CA
L.
If there
is
no interference, set th
is
switch to D
X.
MEMORY l\JNING
For easy selection, you can store the frequencies
of
your favorite
stations in memory. You can store
up
to 54 stat
ions-up
to 18
SW
and 18 FM frequencies each (nine stations per band in two memory
ba
nks) and
up
to 9 frequencies each in LW and MW.
Storing Frequencies
in
Memory
1.
Se
lect t
he
desired band and use direct-access or manual tun-
ing to t
un
e to the frequency you want to store.
2. Press M (memory). M and the available memory location num-
ber flash.
3.
Wh
il
e M and the ava
il
able memory location n
um
ber are flash-
ing, repeatedly press
P1
/P2 to select the desired memory bank
(1 or 2)
to
store a station. The next available memory location
n
um
ber
flashes.
Note:
If you wait more than 15 secon
ds
to press
P1
/P2
, the
receiver returns to the previous
display and you must begin
again from Step 2.
23
To Next Page
Loading...
