48
Problem Cause Remedy
h If the “Camera firmware is out of sync.
Update recommended. Update firmware?”
message appears when you connect the
camera to your PC with the USB cable,
click the [Yes] button and update your
firmware.
h Camera firmware defect.
Everything on the LCD
flashes and “7” or “8”
is displayed.
h Connect the camera to the PC with the
USB cable and select [My Computer] /
[Control Panel] / [System] / [Device
Manager]. In the [Devise Manager]
window, delete [Compose USB device]
or [Unknown device] in [Other devices].
Then disconnect the camera and install
the software before reconnecting the
camera to the PC.
h Connect the camera directly to the PC
using the USB cable, not via a USB hub.
h Disconnect the other USB devices
connected to the PC.
h Connect the camera to the PC with the
USB cable before installing the software.
The PC does not
recognize the camera.
To Next Page
Loading...