Activating AutoTalk (AUTO TALK)
Activating AutoTalk (AUTO TALK)
With Auto Talk, you can answer the phone just by picking up the handset from the cradle:
you don’t have to press any keys. If the handset is already off the cradle, Auto Talk also lets
you answer by pressing any key on the twelve-key dial pad (instead of just TALK/FLASH.
1. With the phone in standby, press and hold CID/MENU.
2. Press to move the pointer to AUTO TALK.
3. Press SELECT/CHANNEL to turn Auto Talk on.
4. Use and to move the pointer to another menu item.
OR
If you’re fi nished, press END to return the handset to standby.
Setting the ringer tone (RINGER)
Setting the ringer tone (RINGER)
You can set the ring tone separately for each handset.
1. With the phone in standby, press and hold CID/MENU.
2. Press SELECT/CHANNEL to rotate through the four available ring tones (A, B,
C, and D). As you switch to the next ring tone, the handset sounds a sample of that
ringer.
3. When you hear the ringer you want, use and to move the pointer to another
menu item.
OR
If you’re fi nished, press END to return the handset to standby.
The handset will use the new ring tone starting with the next incoming call.
Setting the handset ringer volume (RING.
Setting the handset ringer volume (RING.
VOL.)
You can choose from three ringer volume settings separately for each handset. To turn the
ringer off, select RINGER OFF.
1. With the phone in standby, press and hold CID/MENU.
2. Press to move the pointer to RING VOL.
3. Press SELECT/CHANNEL to toggle among three options (HIGH, LOW, and OFF).
As you switch to the next volume level, the handset sounds a sample of the current
ring tone at that level.
4. When you hear the volume level you want, use and to move the pointer to
another menu item.
OR
If you’re fi nished, press END to return the handset to standby.
The handset will use the new ringer volume starting with the next incoming call.
Note: If you set the ring volume of a handset to OFF, this
handset won’t ring at a coming call. Only the keypad and the
display light up to indicate the coming call.
4-1. Making and Receiving Calls
4-1. Making and Receiving Calls
...from a handset
...from a handset
speaker phone
To make
a call...
1. Pick up the handset.
2. Press TALK/FLASH.
3. Listen for the dial tone.
4. Dial the number.
OR
1. Pick up the handset.
2. Dial the number.
3. Press TALK/FLASH.
1. Pick up the handset.
2. Press
.
3. Listen for the dial tone.
4. Dial the number.
OR
1. Pick up the handset.
2. Dial the number.
3. Press
.
To
answer a
call...
1. Pick up the handset. (If AutoTalk is
on, the phone automatically answers
when you pick it up from the cradle.)
2. Press TALK/FLASH. (If Auto Talk
is on, you can also press any key on
the twelve-key dial pad.)
1. Pick up the handset.
2. Press
.
To hang
up...
Press END or return the handset to the cradle.
4-2. Switching a Call to the Handset
4-2. Switching a Call to the Handset
Speakerphone
To switch a normal call to the speakerphone, press on the handset. To switch back to
a normal call, press again.
4-3. Transferring a Call
You can transfer a call from one handset to another.
To Next Page
Loading...
